Moto Guzzi Cafe Racer Le Mans 3 Fabrication Project
5 February 2024
No Comments
Moto Guzzi Cafe Racer Le Mans 3 with Tonti frame 4V Centauro engine and aluminium tank seat pod fabrication modifications
Our Previous
Projects
We Have Solutions For All Your Fabrication Needs!
Projects
Retro Automotive mezzanine CAD model and balustrade
30 January 2024
No Comments
Working with Cory at Retro Automotive and Patty at Epsilon we modelled and manufactured the mezzanine floor and balustrades for the eventual Retro showcase shop.
Retro Automotive Panache kit car aluminium dash and cover panels
19 May 2023
No Comments
Just a small aluminium panel job for Retro Automotive. Replacement of the original aluminium dash for the Panache kit car was undertaken by first planning
Taste of Asia commercial kitchen extraction units
31 March 2023
No Comments
With a tight timeframe JollyCo was tasked to remove existing extraction unit, prep site, fabricate matching extraction units to fit alongside existing main unit and
Clarkies twin turbo V8, VH Valiant Charger vehicle modifications
19 November 2022
No Comments
This little beauty will be transforming into a twin turbo street stomping handful. What was already a nice streetcar will be modified to hold
Edit South steel window, brass stay reproduction
15 July 2022
No Comments
I was approached via a housing maintenance company to take a look at some windows that might need some repair at one of Dunedin’s many
Retro Automotive aluminium intercooler and radiator modifications/ install
8 May 2022
No Comments
This job for Retro Automotive was to shoehorn in the supplied radiator and intercooler into a Mazda Series 5 RX7. The radiator and Intercoolers were
Retro Automotive Mazda 12A peripheral port to IDA intake manifold
8 May 2022
No Comments
Just a small fabrication job for Retro Automotive this time, design and manufacture of an intake manifold to suit a Mazda 12A peripheral port (PP)
Shultz’s Mazda RX4 with LS engine drag car fabrication project
6 August 2021
No Comments
What was once a very competitive rotary powered RX4 drag car is being transformed into a monster by shoehorning an LS V8 engine and a
DF Transales for University of Otago Lindo, Ferguson Building chiller upgrade steelwork measure and drafting
5 August 2021
No Comments
Contracting for the crew at DF Transales in Mosgiel, JollyCo was given the opportunity to measure and draw for manufacture a set of drawings to
Trevor’s internal and external handrails in Stainless Steel and garage awning in Aluminium
10 July 2020
No Comments
Working with the customer, JollyCo was able to design and fabricate an aluminium awning for their Highgate property. This used an internal frame then wrapped
Kate and Mark’s Concertina Fence in Aluminium
7 May 2020
No Comments
Due to a restricted site this Aluminium Concertina fence was fabricated and installed at the customers property. Aluminium was chosen for two reasons. One, that
Geoff’s Balustrade in Stainless Steel and Cedar
16 December 2019
No Comments
Tasked to fabricate a balustrade section that assimilates what was already on site. JollyCo firstly measured what was existing in order to find an appropriate
Paul and Angela’s Balustrades in Mild Steel
1 December 2019
No Comments
Balustrading, a small fence and a couple of gates in Mild Steel where the customer supplied the painting. JollyCo fabricated the components on site to
Previous samples of work before JollyCo
4 July 2018
No Comments
This is a bit of a snapshot of some of the projects I worked on prior to starting JollyCo in 2018.